Check-In conveyors are the first point of interface between the passenger and the baggage handling system, they allow passengers to safely enter their baggage onto the conveying system. They also allow the check-in desk clerk to weigh and label the baggage.
Model 599 Check-In Conveyors
The Model 599 Check-in Conveyor range has been designed to meet the specific needs of airports. Our weigh, label and despatch conveyors can be configured as either one, two or three stage check-in systems, offering choice and flexibility for check-in operations. The Model 599 Check-in Conveyors are finished in stainless steel to a very high quality. As standard they are fitted with dummy end pulleys to eliminate trap points for passengers, operators, bag straps and labels. For extra security safety gates may be fitted to the weigh conveyor preventing passengers from entering the check-in areas when the desks are closed.
Compact conveyor design with proven reliability
Short Faced End Pulley
Eliminates trap points by the use of dummy pulleys
Conveyors Mounted on Guide Wheels
Complete unit can be easily withdrawn for maintenance and cleaning
Facilitates the removal of weigh conveyor without special tooling
Fire Retardant Belting to ISO 340
Reduces the spread of fire
Facilitates installation and any subsequent modifications
Accommodate variations such as sidewall height, bed width, drive components etc.
Reinforced bed plates
Increases load capacity of conveyor
State of the Art PLC Controls
Use of standard PLC technology enables clients’ handling / screening schemes to be complemented
One stage, two stage or three stage
400mm, 450mm, 500mm, 550mm or 600mm
50mm, 300mm or 450mm
Fitted or Not Fitted
Parallel or tapered turning drums can be fitted at junction with collector
Normally – Weigh 0.5m/s Label 0.8m/s Despatch 1.0m/s Others available if required
Model 599 Check-In Conveyor - Stage Options
One Stage: Bags are weighed, labelled and despatched on a single conveyor. Two Stage: Usually the weighing and label operations are carried out on a single conveyor. Baggage is
injected onto the Collector Conveyor from the Despatch Conveyor. Three Stage: Separate conveyors are used for the weigh, label and despatch functions.
General Construction – Weigh, Label and Despatch Conveyors
135mm diameter 0.75kw motorised drum mounted within moulded end caps. The face width of the drum is narrower than the belt, and the end caps are formed such that they act as a dummy pulley (or static shroud).
75mm diameter end pulleys are machined and fitted to 20mm diameter bright mild steel axles mounted in sealed for life precision bearings. The face width of the pulley is narrower than the belt, and plastic bushes are located at the end of the shaft to act as dummy pulleys.
Drive & Tail Snubber Pulley
The Drive Snubber Pulley is 75mm diameter, the tail pulley is 50mm diameter. The drive snubber pulley ensures that the pulley wrap on the drive drum is kept to a maximum. Both are screw adjustable for belt tracking and tensioning purposes.
Sidewalls are formed from 2.0mm thick Stainless Steel. The sidewalls are bolted to both sides of the bed section, additionally there are formed mild steel cross members which connect the two sides together underneath the bed section. This ensures good rigidity. The sidewalls can be quickly removed for maintenance or cleaning purposes.
Press-formed channel section from 2.5mm thick mild steel, width equal to belt width plus 20mm and 50mm deep. Stainless cladding. The front panel is manufactured from 2.5 mm thick stainless steel. The Daifuku Logan logo is fixed on to this panel. The panel can be unlatched and pivoted down to allow access under the conveyor for cleaning, and to facilitate conveyor removal. The outer sides of all conveyors in full public view will be clad with 1.6 mm polished stainless steel panels.
Tracks and Castors
All of the Check-In conveyors are mounted on castors which run in a track, the weigh conveyor tracks are fixed to the top of the weigh scale. The conveyors are retained in their operating position by a latch bolt. Access to the weigh conveyor bolt is via the hinged stainless steel plate. This allows for easy removal of the units for cleaning and maintenance purposes.
Two ply polyester endless with PVC cover and diamond pattern top.
Daifuku Logan IS deliverING the pilot baggage handling system standard 3 migration of GROUPE ADP at PARIS - Charles de Gaulle terminal 3
DAIFUKU LOGAN, Ivry (November, 2016) — Daifuku Logan Ltd, a subsidiary of Daifuku Co. Ltd Airport Technologies Group and a leading provider of airport baggage handling systems – announced today a Standard 3 Baggage Handling contract with Groupe ADP in France.
Daifuku Logan has been entrusted by Groupe ADP the migration of the baggage handling system security process from “Standard 2” to “Standard 3” at Paris-Charles de Gaulle Terminal 3.
This project includes the entire replacement of the conveying systems, the baggage security process with the integration of “Standard 3” machines and automatic sortation functions.
The first phase of the project took place in Hall A and has been operational since the beginning of April 2016. The new system has a capacity of 1,800 bags per hour with two “Standard 3” screening machines. In the second phase, Hall B is currently being upgraded and will be operational in the first quarter of 2017.
This pilot project is an unique opportunity for Groupe ADP to obtain invaluable experience for future “Standard 3” upgrades of all their baggage handling systems in Paris-Orly and Paris-Charles de Gaulle.
Ron Osborne, Managing Director Daifuku Logan said: "We are very proud of Groupe ADP confidence in Daifuku to deliver their pilot sites and with great pleasure we have successfully integrated their first Standard 3 machines”.
Daifuku Logan is part of the Daifuku Airport Technologies division that has already installed more than 430 CT security screening machines.
Daifuku Logan is a subsidiary of Daifuku Co. Ltd., an industry leader in providing robust, durable, reliable, and energy efficient baggage handling systems. For over 70 years the Daifuku Group has been developing seamless innovation in automated material handling solutions.
With a full range of baggage system products, solutions and services, Daifuku Logan is one of the few companies in the world able to provide for all aspects of a baggage system solution from design to hand over and operations & maintenance.