Baggage Delivery Chutes

Application

Straight chutes, curved chutes and glacis are used throughout baggage handling systems to perform a multitude of functions.  These include:

  • Sortation chute fed from Tilt Tray or similar sorting device.

  • Late ‘bag drop’ at boarding gate.

  • Temporary storage device.

  • Vertical downward transportation of bags between floor levels.

Chutes & Glacis

Straight Chutes: Daifuku Logan straight chutes are designed to handle a wide range of product and convey them in a controlled manner whist causing the minimum disruption to baggage flow. 

Glacis: Daifuku Logan glacis are similar in design to our straight chutes but are capable of giving an optimum amount of storage area combined with the most effective use of floor space.

Spiral Chutes: Daifuku Logan spiral chutes are designed with the same principals in mind as straight chutes but have the added advantages of being able to accept multiple inputs into the same chute within a limited floor space. They have also been designed and profiled to allow product to ‘self start’ from any position along the chute

Specialised Chutes: Daifuku Logan also offer a range of specialised chutes, designed to perform specific tasks or functions within baggage handling systems. Such examples include ‘Petty Wheel’ transition chutes, gated chutes, dual output chutes, etc.

Features

Application Benefits

General

Profiled Entry / Exit Sections

Allows chutes to be fed by or to feed most types of conveyor or sorting device

High Storage Capacity

Chutes or Glacis can eliminate the need for Early Bag storage lanes within a BHS

Specialised Coatings or Materials

Controls the flow of products down the chute, even with differing product finishes

Space Saving Abilities

Chutes or glacis usually present an effective solution were other products will be too complex or will not fit.

Low Maintenance

No moving parts removes the need for sustained maintenance

Bespoke Designs

Chutes and Glacis are designed to suit individual products and customer requirements

Straight Chutes & Glacis

Compact Chute Spacing

Optimum number of destination chutes within limited floor space

Variable Angle of Decent

High decent rate with smooth and controlled run-out

Spiral Chutes

Profiled Bed Plate

Controls speed and flow of product down the chute

Multiple Inputs

Allows two tiers (or more) of sortation devices

Self Start

Product stopped on the chute, from accumulation, will start decent by gravity alone

Chutes & Glacis
General Description

Straight Chutes & Glacis

Straight Chutes are custom designed to suit the product and application.  However, the design reflects proven chute practices based upon many years of experience within the industry.  Chutes may be constructed from a range of materials, having bedplates from either, Stainless Steel, Mild Steel, Wood, Plastic, Rollers or a combination of these materials. 

The chute length, total fall in height, angle of decent (or combined angles for complex chutes) and chute width are custom designed to fit within  the working area whilst being designed to convey the product in the safest manner.

Glacis are essentially wide straight chutes, in which a number of sorts can be performed to the single work surface.  These sorts are generally spread across a longer chute surface, generally from 3 metres wide to the maximum space available within the working area.  All the design variations that are available for straight chutes are also available to Glacis. 

Spiral Chutes

Spiral chutes are produced to a choice of bed profiles, which can be either Safeglide or Daifuku Logan curved profile.   Chutes may be manufactured from Stainless Steel, Mild Steel or GRP (Glass Reinforced Plastic).  Where Mild Steel and GRP chutes are used it is common to apply a low friction coating to the chute surface to assist the self starting properties of the chutes.  The chute radius and pitch of fall may be varied to suit the product being conveyed and the specific installation within which the chute is being installed.


in     by Administrator 08-03-2017
0

Daifuku Logan IS deliverING the pilot baggage handling system standard 3 migration of GROUPE ADP at PARIS - Charles de Gaulle terminal 3

March 17

DAIFUKU LOGAN, Ivry (November, 2016) — Daifuku Logan Ltd, a subsidiary of Daifuku Co. Ltd Airport Technologies Group and a leading provider of airport baggage handling systems – announced today a Standard 3 Baggage Handling contract with Groupe ADP in France.

Daifuku Logan has been entrusted by Groupe ADP the migration of the baggage handling system security process from “Standard 2” to “Standard 3” at Paris-Charles de Gaulle Terminal 3.

This project includes the entire replacement of the conveying systems, the baggage security process with the integration of “Standard 3” machines and automatic sortation functions.

The first phase of the project took place in Hall A and has been operational since the beginning of April 2016. The new system has a capacity of 1,800 bags per hour with two “Standard 3” screening machines. In the second phase, Hall B is currently being upgraded and will be operational in the first quarter of 2017.

This pilot project is an unique opportunity for Groupe ADP to obtain invaluable experience for future “Standard 3” upgrades of all their baggage handling systems in Paris-Orly and Paris-Charles de Gaulle.

Ron Osborne, Managing Director Daifuku Logan said: "We are very proud of Groupe ADP confidence in Daifuku to deliver their pilot sites and with great pleasure we have successfully integrated their first Standard 3 machines”.

Daifuku Logan is part of the Daifuku Airport Technologies division that has already installed more than 430 CT security screening machines.

Daifuku provides baggage handling systems and services at hundreds of global installations. The airport group consists of Jervis B. Webb Company, BCS Group, Daifuku Logan, Logan Teleflex and Elite Line Services (ELS).

About Daifuku Logan

Daifuku Logan is a subsidiary of Daifuku Co. Ltd., an industry leader in providing robust, durable, reliable, and energy efficient baggage handling systems. For over 70 years the Daifuku Group has been developing seamless innovation in automated material handling solutions.

With a full range of baggage system products, solutions and services, Daifuku Logan is one of the few companies in the world able to provide for all aspects of a baggage system solution from design to hand over and operations & maintenance.

Captcha

0 Comments

TWITTER

BROCHURE

© Daifuku Logan  Ltd - VAT number is GB 433 5332 73 - Registered in England - Company Number 3116545 - Terms & Conditions DLL 066 - Terms & Conditions DLL 066I