Model 700RF

Tilt Tray
Sorter

Application

Tilt Tray Sorters are probably the most versatile of all sorting machines. Aimed at larger and irregular shaped items, they provide an inherent facility for recirculation of items which differentiates them from many other sorting technologies. Above all they provide for very high levels of throughput with a highly controlled sorting action, designed to minimise damage to items which can be associated with mechanical handling processes.

Model 700RF Tilt Tray Sorter

The Model 700RF Tilt Tray Sorter represents the most advanced sorter available today. It uses an electrical tip action controlled via a radio frequency signalling system which permits unprecedented levels of control over the items to be handled. It also enables facilities to be provided which have not been feasible with previous generations of tilt tray sorter designs, for example, tray banking on curve sections.

When this sorter is coupled with state of the art dynamic induction units, developed by Daifuku Logan, a complete, capable and comprehensive package for sortation needs is provided.

Features

Application Benefits

Linear Induction Motor Drive

Quiet, wear free operation

Advanced LIM Technology

Reduced running costs. Integrated Power Correction - Ensures that the machine runs even more energy efficiently.

Non Contact Design

Reduces downtime for planned maintenance

Maintenance Friendly Design

Routine maintenance activities are simplified by design, thus are faster to complete

Totally Enclosed Sorter Track

Eliminates problems associated with stray product, improves machine maintainability

High Availability

Proven high reliability (typically in excess of 99.5%) with fast repair times gives high availability

Controllable Tip Profile

Minimises impact to products during sorter tipping and gives the ability to tip on curves

Extensive Detection Arrays

Minimises machine and product damage caused by exceptional conditions

High Performance Inducts with Re- Synchronisation

Give high throughput rates whilst reducing operator attendance at induction points

RF Signalling System

Infinite number of software defined tip positions

Simplified addition of chutes

Accommodate variations in circuit shape, building restraints etc.

Hinged LIM Support Frame

Gives easy maintenance access to LIM drives via drop down support frame, improves MTTR of sorter

Split Tipper Module

Simplifies carriage replacement by eliminating the need to split the sorter train

Tip On Bends

Permits greater density of chutes per metre of sorter.

Plug & Play

Key maintenance elements fitted with plug socket connections:
LIM drives
Tipper and Tray modules

Quiet Running During Operation

Noise level of 62dB(A)

Modular Design

Facilitates complex installations and subsequent modifications, simplifies maintenance activities

State of the Art PLC Controls

Use of standard PLC technology enables clients’ sorting / screening schemes to be complemented

Specifications

Tray Pitch Options

  • 1200mm

  • Product Sizes:

  • Maximum: 900 x 750 x 900mm (Single Tray)

  • Minimum:  150 x 150 x 75mm

  • Maximum Single Tray Load 60 Kg

  • Maximum Linear Speed 2m/sec

Maximum Incline Angle 10 degree

  • Induction Angles of 30 and 45 degrees

  • Track Bend Centreline Radii

    • 3.0 meters (Speeds < 1.5m/s, All Pitches)

    • 3.65 meters (Speeds < 1.5m/s, All Pitches)

    • 4.0 meters (Speeds > 1.5m/s; All Pitches)

    • 4.5 meters (Speeds < 1.5m/s, All Pitches)

  • Totally Enclosed Track

  • Cable Routing Built Into Track Design

  • Tip Angle of 38 degrees

General Description

The Model 700 Powered Tilt Tray Sorter consists of a series of linked carriages powered around the sorter track by specially tuned Linear Induction Motors (LIMs).

The carriages comprise of powered tilting units which support product-carrying trays. These trays are used for the transportation of products and can be energised to tilt to both sides of the machine at any software programme discharge position.

The tipping action of the tray is such that the rotational profile remains constant throughout the product weight range, without causing launching of the lightest product.

The tipping action is generated through the control of a specialised-braked geared motor unit, removing the need for mechanical latches, cams and switch devices. This contact-less approach removes the necessity for maintenance and setting up associated with other mechanical designs. The other main benefit of this approach is that the tipping profile is not affected by the linear speed for the sorter.

When a loaded tray arrives at the required discharge position, it is remotely signalled to tip by a Radio Frequency (RF) sub system. When the tip has been completed the on board controller is instructed to straighten the tray prior to the next induction point ready to accept the product.

 

in     by Administrator 08-03-2017
0

Daifuku Logan IS deliverING the pilot baggage handling system standard 3 migration of GROUPE ADP at PARIS - Charles de Gaulle terminal 3

March 17

DAIFUKU LOGAN, Ivry (November, 2016) — Daifuku Logan Ltd, a subsidiary of Daifuku Co. Ltd Airport Technologies Group and a leading provider of airport baggage handling systems – announced today a Standard 3 Baggage Handling contract with Groupe ADP in France.

Daifuku Logan has been entrusted by Groupe ADP the migration of the baggage handling system security process from “Standard 2” to “Standard 3” at Paris-Charles de Gaulle Terminal 3.

This project includes the entire replacement of the conveying systems, the baggage security process with the integration of “Standard 3” machines and automatic sortation functions.

The first phase of the project took place in Hall A and has been operational since the beginning of April 2016. The new system has a capacity of 1,800 bags per hour with two “Standard 3” screening machines. In the second phase, Hall B is currently being upgraded and will be operational in the first quarter of 2017.

This pilot project is an unique opportunity for Groupe ADP to obtain invaluable experience for future “Standard 3” upgrades of all their baggage handling systems in Paris-Orly and Paris-Charles de Gaulle.

Ron Osborne, Managing Director Daifuku Logan said: "We are very proud of Groupe ADP confidence in Daifuku to deliver their pilot sites and with great pleasure we have successfully integrated their first Standard 3 machines”.

Daifuku Logan is part of the Daifuku Airport Technologies division that has already installed more than 430 CT security screening machines.

Daifuku provides baggage handling systems and services at hundreds of global installations. The airport group consists of Jervis B. Webb Company, BCS Group, Daifuku Logan, Logan Teleflex and Elite Line Services (ELS).

About Daifuku Logan

Daifuku Logan is a subsidiary of Daifuku Co. Ltd., an industry leader in providing robust, durable, reliable, and energy efficient baggage handling systems. For over 70 years the Daifuku Group has been developing seamless innovation in automated material handling solutions.

With a full range of baggage system products, solutions and services, Daifuku Logan is one of the few companies in the world able to provide for all aspects of a baggage system solution from design to hand over and operations & maintenance.

Captcha

0 Comments

TWITTER

BROCHURE

© Daifuku Logan  Ltd - VAT number is GB 433 5332 73 - Registered in England - Company Number 3116545 - Terms & Conditions DLL 066 - Terms & Conditions DLL 066I